John Deere Cool-Gard
John Deere Cool-Gard Antifreeze/Summer Coolant gives you the ultimate year-round protection for your cooling system.
Are you using the right antifreeze/summer coolant?
Not if you haven't matched the right product to the performance demands of your equipment! Heavy-duty engine cooling systems need special care and protection year-round. Unfortunately, many owners don't service their equipment's cooling systems regularly. Or if they do, they may believe that any automotive antifreeze or summer coolant will do the job.
But that's not true! While most antifreeze/ coolants will prevent freeze-up or boil-over, they don't perform adequately in heavy-duty machines. They can't provide the balanced protection your cooling system needs to operate efficiently under extreme pressures and temperatures, and with high volumes of flowing engine coolant. The right engine coolant will protect internal surfaces and components, as well as provide freeze protection and heat transfer properties. Water only is never recommended.
Why choose Cool-Gard over another coolant?
John Deere has specifically engineered a fully formulated, heavy-duty antifreeze/summer coolant to match the performance requirements of our equipment. This is the same antifreeze used in new John Deere machines. In fact, our engineers highly recommend it for use in all heavy-duty and light-duty diesel and gasoline engines, including automobiles. John Deere Cool-Gard is available in two forms of concentrate, which must be mixed with water for proper freeze protection, and pre-mix (ready to use), which contains 50 percent demineralized water and has a freeze point of -34 oF. (-37 oC). Both contain coolant conditioner, anti-corrosion additives, and anti-foaming agents to guard against liner pitting, rust, corrosion, and scaling. Both have a service life of 5 years/5,000 hours.
CONCENTRATE:
- 1-gal. (TY16034)
- 55-gal. (TY16035)
- 330-gal. (TY24503)
PRE-DILUTED:
- 2 1/2 - gal. (TY16036)
- 55-gal. (TY16037)
- 330-gal. (TY24504)
* Some parts not available in some countries.
How does Cool-Gard benefit you?
Cool-Gard exceeds all John Deere performance specifications and ASTM requirements. That means it provides the ultimate protection for heavy-duty cooling systems.
We highly recommend it for use in all heavy-duty and light-duty diesel and gasoline engines, including aluminum engines.
Has a five-year or 5,000-hour service life in both concentrate and 50/50 pre-mix form, provided service interval maintenance recommendations are followed.
John Deere's formulation includes a balanced blend of ingredients to protect all components.
John Deere's formulation includes a balanced blend of ingredients to protect all components.
Balanced ingredients protect the system from scale deposits and corrosion, extend water pump seal life, and reduce internal pump erosion.
Special anti-foaming agents enhance heat transfer ability, reduce coolant pump damage and oxidation, and extend corrosion inhibitor life.
Cool-Gard is a fully-formulated coolant
The correct concentration of coolant conditioner is in the system. Note: Always top up with John Deere Cool-Gard Pre-mix 50/50.
There is no need to add coolant conditioner or supplemental coolant additives at initial fill, or when you refill your system. However, because all engine coolant loses its potency over time, we suggest testing coolant at recommended service intervals or annually using the John Deere Coolant Test Kit (TY16175) or the Coolscan Kit (DSO251) to extend drain intervals. John Deere Liquid Coolant Conditioner should be added when indicated. If your Deere engine cooling systems currently use John Deere Cool-Gard, and if you don't test, we recommend John Deere Liquid Coolant Conditioner at annual service intervals.
John Deere Coolant Conditioner provides additional protection
John Deere Coolant Conditioner provides excellent protection from liner pitting, scaling, corrosion, and gelling. It is excellent for use in all engine cooling systems requiring a coolant conditioner (supplemental coolant additive).
John Deere Liquid Coolant Conditioner is available in two sizes: a 16-oz. bottle (TY16004) and a 1/2 gal. jug (TY16005)
Parts
After Hours Parts | Lubricants | Hydraulic and Transmission Oil | Parts Country | Coolants | Batteries